| |
 |
RADEX®
- N Torsionally Stiff, Flexible
Steel Lamina
Couplings |
| |
|
for a
backlash - free torque transmission
with spacer that can be radially
disassembled. Maintenance -free and
temperature resistant up to 300oC.
Even with high displacements only low
restoring forces are produced. |
|
|
| |
|
LAMEX®
Torsionally Stiff, Flexible Couplings |
| |
|
are a
coupling system with flexible elements
from electro - conductive nylon which
are connected on alternate sides with
the couplings hubs. The are suitable for
explosion - proof applications. |
|
 |
|
| |
 |
|
MINEX®
- S Permanent magnetic couplings |
| |
|
are
especially used in pump and mixer
drives. The torque transmission is
contactlessly effected by a stationary
can which ensured a hermetic
separation of the drive side and the
driven side. |
|
|
| |
|
Bellhousings |
| |
|
are
connection elements between IEC electric
motors and hydraulic pumps which are
available from stock for all hydraulic
pumps. For every bellhousing application
KTR foot flanges are available.
The PIK ( bellhousing with
integrated oil cooler ) is a high
capacity oil cooler operating according
to a patented low pressure principle. |
|
 |
|
| |
 |
|
Oil tanks and Accessories |
| |
|
Aluminium tanks series BAK from 13
litres to 70 litres with oil
collecting groove moulded on periphery
are available from stock. Steel tanks
from 63 litres to 1.250 litres,
manufactured to DIN standards, are
available at low prices. |
|
|
| |
|
Damping Elements |
| |
|
For the
optimum noise reduction of the hydraulic
power pack KTR offets various noise
damping elements for example, damping
rods for electric motors and foot
flanges, D rings to be assembled between
bellhousing and pump. To reduce noise
occurring between drive unit and oil
tank, DT separation ( fail Safe ) can be
used. DT rings are a registered design
of interconnected parts. |
|
 |
|
| |
 |
|
RUFLEX®
Torque Limiters |
| |
|
Provide
for frictionally engaged torque
transmission and protect the drive
unit against destruction. Applicable
up to 6.800 Nm. In combination with
ROTEX®
couplings the are available with a
maximum bore of 165 mm. The slipping
torque is variable adjustable by usual
tools. |
|
|
| |
|
SYNTEX®
and
KTR - SI Overload Hubs |
| |
|
are high
- quality overload elements protecting
people and machines against damage.
Consisting of few elements only, SYNTEX®
overload hubs allow for a positive and
backlash - free torque transmission up
to 300 Nm. KTR - SI overload hubs allow
for positive torque transmission up to
12,000 Nm. |
|
 |
|
| |
 |
|
CLAMPEX®
clamping elements |
| |
|
Provide
for a backlash - free, non - positive
shaft - hub - connection for a
transmission of high torques with no
wear. |
|
|
| |
|
KTR Precision Joints |
| |
|
are
suitable for a big articulated angle.
They are manufactured according to DIN
808 with hardened slipping surface or
maintenance - free needle bearings for
speeds up to 4.000 1/min. |
|
 |
|
| |
|
1 - 2
|
