1 - 2

 
  PROCESS INDICATOR CONTROLLERS
 

Input : RTD / TC / CURRENT / VOLTAGE / FREQUENCY
Display : 3.5 Digit / 4.5 Digit LED/LCD, 0.5"/1.0"Digital Display.
Type of Control : ON / OFF
Set Point : Potentiometer / Thumbwheel switch.
Control Output : Relay 1 C/o 1 A @ 230V AC Resistive load
Relay ON Condition : Up to 50oC, Rh upto 95% non-condensing
Power Supply : 24V AC / 230V AC / 110V AC .

 
  PROCESS SCANNERS
 
Input : RTD / TC / mA / mV.
Display : 0.5" Red LED or 16 X 2 LCD.
Power Supply : 230V Ac / 24V AC / 110V AC.
Communication Port : RS 232 / RS 485.
Accuracy : better than 0.5% of FSD.
Options : Alarms individual / Group.
No. of channels : 4 / 8 / 12 / 16

TYPES AVAILABLE
  >>  Rotary Switch selectable
  >>  Digital channel selection
  >>  Microprocessor based with linearization
  >>  Universal input scanner
  >>  All above scanner type in flame proof CMRI certified housing

 
  SIGNAL ISOLATORS
 

Compact back panel Din Rail mounting design
Inputs : 4 to 20 mA/TC/RTD/VOLTAGE/FREQ.
Isolation Voltage : 1 KV for 1 min
Power Supply : 230V AC / 24V DC / 110C AC

TYPES AVAILABLE
  >>  Loop powered Signal Isolators
  >>  230 V AC operated Signal Isolators
  >>  2 V DC/110 V AC operated Signal Isolators
  >>  Signal Isolators with Dual outputs.
  >>  multiple output isolators ( Max. 4)
  >>  Trip Amplifiers
  >>  Power line transducers
  >>  High / Low / Mean selectors
  >>  Square Root extractors

 
  TIMERS & COUNTERS
 
  >>  On / Off delay timers with adjustable timing
  >>  Interval timers, Sequential timers, On / Off cyclic timers
  >>  Preset Counters from 2 digit to 6 digits retentative & non-
         retentative
  >>  Fully programmable microprocessor based sequential timers
  >>  Optional solid state relay output
  >>  Cost effective, rugged & robust design for industrial
         environmental

 
  D C POWER SUPPLY
 

  >>  Input 230V AC / 110V AC
  >>  Output Voltage : 5 to 24 V DC variable / Fixed
  >>  Mounting : Din Rail / Back of the Panel
  >>  Current : 30 mA to ............... 45 Amps
  >>  Linear as well as SMPS types
  >>  Over load & short circuit protection
  >>  Modular & Rugged design for industrial environment
  >>  Application : To provide DC power required control panels, field
         transmitters

 
  ALARM ANNUNCIATORS
 
No. of Points : 8/12/16
Power supply : 230 V AC /110v AC
Bazel Size : 96 x 96 mm 2 points, 192 x 96 mm 4 points 192 x 192 mm 8 points
Windows Indications : Super bright RED LED's 45mm x 45mm
Input : NO/NC Potential free contact
Output : Relay change over contact
Push Buttons - NO type. Push buttons to be connected
externally. Can be common for all multiple units.
Operating Sequence :
  >>  Manual reset
  >>  Auto reset
  >>  First up
  >>  Ring back (optional)

 

1 - 2